Solutions | نظام التصوير البانورامى (Street View)
     
 
Ladybug3 (1394b)
The high resolution Ladybug®3 spherical digital video camera system has six 2 MP cameras that enable the system to collect video from more than 80% of the full 360° sphere, and an IEEE-1394b (FireWire) interface with locking screw connection that allows JPEG-compressed 12MP resolution images to be streamed to disk at 15fps. The Ladybug3 is an ideal solution for applications that require very high resolution, a weather-resistant case, direct FireWire connection, or the ability to synchronize to external devices such as an external trigger or light source.
Contact us for a free copy of the Ladybug3 Demo DVD.
 Benefits of IEEE-1394b (FireWire S800)
MODEL VERSION MP IMAGING SENSOR
 
LD3-20S4C-33R Red 2.0 MP
- Sony ICX274 CCD x6, 1/1.8", 4.4
- Global Shutter
- 1600 x 1200 at 15 FPS JPEG compressed; 6.5 FPS uncompressed
LD3-20S4C-33B Black 2.0 MP
A/D Converter 12-bit
Video Data Output 8-bit Raw Bayer digital data
Image Data Formats Raw8, Mono8
Partial Image Modes Pixel binning and region of interest (ROI) modes
Image Processing Shutter, gain, white balance, gamma and JPEG compression, are programmable via software
Gain
Automatic/Manual/One-Push Gain modes
0 - 24 dB
High Dynamic Range Cycle 4 gain and exposure presets
Digital Interface 9-pin 1394b 800 MB/s interface for camera control, power, and video data; locking screw guarantee secure connection
Transfer Rates 100, 200, 400, 800 Mbit/s
GPIO 8-pin GPIO connector for external trigger, strobe, serial port, or external power
External Trigger Modes IIDC Trigger Modes
Shutter
Global Shutter
Automatic/Manual/One-Push/Extended Shutter modes
0.01 ms to 4.2 s (extended shutter mode)
Memory Channels 2 memory channels for custom camera settings
Case Machined aluminum housing, anodized red or black; single unit, water resistant
Dimensions 122 mm x 141 mm (without lens hoods)
Mass 2414 g
Power Consumption 7.2 W at 12 V via GPIO or FireWire interface
Camera Specification IIDC v1.31
Camera Control via Ladybug SDK, CSRs, or third party software
Camera Updates In-field firmware updates
Optics Six high quality 3.3 mm focal length lenses
Field of View >80% of full sphere
Spherical Distance Calibrated at 20 m
Focus Distance ~200 cm. Objects have an acceptable sharpness from ~60 cm to infinity
Temperature Operating: 0° to 45°C; Storage: -30° to 60°C
Humidity Operating: 20 to 80% (no condensation) ; Storage: 20 to 95% (no condensation)
Emissions Compliance CE, FCC, RoHS
Operating System Windows XP, Windows 7
Warranty One Year
Development Kit Contents
  The following items are included in the Ladybug3 Development Accessory Kit DEVKIT-01-0004:
   
  - FWB-PCIE-01: single bus 1394b PCI Express card
  - ACC-01-2017: 10 meter 1394b cable
  - FWB-EC-2PORT: 1394b ExpressCard for notebooks / laptops
  - ACC-01-9003: power supply for ExpressCard
  - ACC-01-3005: 4.5 meter GPIO wiring harness
  - ACC-01-0012: 4-Legged Desktop mount
  - ACC-01-0013: tripod adapter
  - Ladybug3 Getting Started Manual
  - Ladybug SDK (C/C++ API and device drivers) CD
Emissions and RoHS Compliance
  FCC / CE Compliance
  This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
  RoHS / WEEE Compliance
  This product is RoHS and WEEE compliant.